“Keep your CNC operator busy every moment”. Based in this concept Milltronics Manufacturing Company has increased up production on its newly designed Dual or Twin Table TT Series machining centers to meet the increasing customer demands.
This unique CNC machine design offers two separate work tables that shuttle outside the working area for convenient part loading while the opposite work table is inside the machining enclosure cutting parts. Finished the machining operation, the individual work tables shuttle the completed parts out and the next table enters the work area for machining, creating a non-stop machining cycle.
The rigid cast iron bridge design of the TT24 and TT40 CNC machines utilizes a single set of linear ball or roller ways with independent ball screws and axes motors for table control providing superior accuracy and cutting performance. Enhancement of the TT's cutting performance is provided through an Inline spindle, available standard at 10,000 RPM or optional 15,000 RPM. With 1600 IPM rapid traverse rates on the TT24 and TT40, high RPMs, high speed double arm ATC on the TT24 and TT40, plus the elimination of spindle down time for part loading typical of conventional machining centers, the TT CNC Series raises a new meaning to Lean Manufacturing.
These machines are available in three sizes, the TT24 with a 24" square work envelope, the TT40 with a 40" square work envelope, and the TT60 with twin 60x80" tables, the TT Series machines deliver a new level of cost effective machining to small and large shops alike.
These are some TT24’s characteristics or features according to Milltronics:
-Fully integrated twin pallet machine with a unique design requiring no pallet removal
-Conversational programming with Milltronics CNC control
-Inline spindle design – 24 HP standard with 35 HP option
-Reduced cycle times due to no part loading time
-100% cast iron design with 10,000 lb machine weight
-1600 ipm rapids
-24 pocket tool changer standard
-Large memories for part storage and execution
-Ground ball screw construction
True encoder positioning feedback
-Graphic program verification
-No leaning into the machine!
-No doors to open and close!
-No time lost changing parts!
-Accurate time management
-Superior chip and coolant control
-Designed and built by American craftsmen.
This unique CNC machine design offers two separate work tables that shuttle outside the working area for convenient part loading while the opposite work table is inside the machining enclosure cutting parts. Finished the machining operation, the individual work tables shuttle the completed parts out and the next table enters the work area for machining, creating a non-stop machining cycle.
The rigid cast iron bridge design of the TT24 and TT40 CNC machines utilizes a single set of linear ball or roller ways with independent ball screws and axes motors for table control providing superior accuracy and cutting performance. Enhancement of the TT's cutting performance is provided through an Inline spindle, available standard at 10,000 RPM or optional 15,000 RPM. With 1600 IPM rapid traverse rates on the TT24 and TT40, high RPMs, high speed double arm ATC on the TT24 and TT40, plus the elimination of spindle down time for part loading typical of conventional machining centers, the TT CNC Series raises a new meaning to Lean Manufacturing.
These machines are available in three sizes, the TT24 with a 24" square work envelope, the TT40 with a 40" square work envelope, and the TT60 with twin 60x80" tables, the TT Series machines deliver a new level of cost effective machining to small and large shops alike.
These are some TT24’s characteristics or features according to Milltronics:
-Fully integrated twin pallet machine with a unique design requiring no pallet removal
-Conversational programming with Milltronics CNC control
-Inline spindle design – 24 HP standard with 35 HP option
-Reduced cycle times due to no part loading time
-100% cast iron design with 10,000 lb machine weight
-1600 ipm rapids
-24 pocket tool changer standard
-Large memories for part storage and execution
-Ground ball screw construction
True encoder positioning feedback
-Graphic program verification
-No leaning into the machine!
-No doors to open and close!
-No time lost changing parts!
-Accurate time management
-Superior chip and coolant control
-Designed and built by American craftsmen.
No comments:
Post a Comment